Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$140.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp 11-speed Freehub Kit for 177 Hub
$109.99 - $136.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 303 Firecrest Tubeless Disc Brake 700c Front
$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 NSW Carbon Tubeless Rim Brake Front
$1,400.00
The 45mm deep 303 NSW is built for a singular purpose: to be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides, Gran Fondos, and wandering adventures. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world's fastest riders. The 303 NSW Tubeless features a 19mm internal rim width and corresponding outer rim shape for aerodynamic optimization with 25mm tires. This wheel allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ShowStopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp's ImPress direct-print technology - Ships with QR end caps and quick release skewers
Zipp 303 NSW Carbon Tubeless Rim Brake Rear
$1,800.00
The 45mm-deep 303 NSW is built for a singular purpose: to be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides, Gran Fondos, and wandering adventures. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world's fastest riders. The 303 NSW Tubeless features a 19mm internal rim width and corresponding outer rim shape for aerodynamic optimization with 25mm tires. This wheel allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - Showstopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - Cognition hub features Axial Clutch technology to allow the freehub's ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp's ImPress direct-print technology - Ships with QR end caps and quick release skewers
Zipp 404 NSW Carbon Tubeless Disc Brake Front
$1,400.00
The Zipp 404 NSW Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the Cognition disc-brake hubset for increased durability and less drag. This wheel, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance while retaining compatibility with tubeless and traditional clinchers. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 404 NSW Carbon Tubeless Disc Brake Rear
$1,800.00
The Zipp 404 NSW Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the Cognition disc-brake hubset for increased durability and less drag. This wheel, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance while retaining compatibility with tubeless and traditional clinchers. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Cognition DB hubset with Axial Clutch technology provides reduced drag when coasting - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Wheels Manufacturing Inc. Axle-10 Axle
$38.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 137mm - 1 axle per bag
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
WTB TCS Brass 34mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Brass 46mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Stan's NoTubes Alloy Tubeless Valve Stems
$25.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Neo Conversion Kit
$37.00 - $52.00
Kit allows you to convert your Neo or Neo Ultimate hub. The thru-axle to QR kit includes two SealLock end caps and Stan's aluminum quick-release skewer. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. The QR/thru-axle to bolt-on kit includes end caps, threaded axle, bolts and washers. Bolt-on axles are recommended to prevent slipping and wheel misalignment in frames with horizontal drop-outs. - Not compatible with Centerlock or Boost hubs
Stan's NoTubes Rim Tape
$13.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Threaded Valve Extenders
$26.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Saris Trainer Skewer
$19.99
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Roval CLX 50 Disc Clincher Front
$1,100.00 - $1,125.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that’s where the all-new CLX 50 comes in. When we set out to create the CLX 50 Disc, we had clear goals in mind—create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call "the unicorn wheel." Why discs you ask? With our disc-specific rims, we ditch the brake track, making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions. Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 21 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system—not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 1415-gram clincher disc wheelset that's not only ~300 grams lighter than the competition’s similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
Roval Tubeless Valves
$20.00
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
PowerTap 15mm Aluminum Freehub Body Kit (11-Speed)
$99.99 - $299.99
PowerTap’s 15mm Aluminum Freehub Body Kit is constructed of stiff, light aluminum and steel, and rolls on fine bearings. This is the correct replacement freehub for your PowerTap 11-speed wheel.
Mavic 12 > 9.5mm Rear Axle Adapters
$7.90
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. - Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts - Requires one pair per hub
Hope Pro 2 Evo Rear 12x142mm Conversion Kit
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
Hope Pro2 12x142mm Rear Thru-Axle Adaptor Caps
$39.48
Hope Rear Axle Conversion Kits · For Pre-2011 Hope hubs labeled Pro2(axle and end caps)
ENVE ENVE 65 i9 Disc Wheelset
$1,600.00
The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah
ENVE SES 3.4 AR Disc Enve Alloy Hub Wheelset
$2,550.00
What It Is The SES 3.4 AR is the embodiment of the modern disc brake-only road wheelset. Aerodynamically optimized for high-volume tires (28 - 32mm), lightweight for long days in the mountains, high volume for all roads, and arguably the most versatile wheelset ENVE has ever made. Science & Insight In 2016 we launched the SES 4.5 AR, a wheelset ahead of its time. Since then, road riders, frame manufacturers, and tire makers have all caught the high-volume vision which has propelled the one-of-its-kind 4.5 AR to be our most popular wheel in North America where the high-volume all-road movement has gained the most traction. As more bikes are created that can accommodate tire clearances up to 32mm, we saw the need to create a more versatile, climber-friendly SES AR wheelset, and the SES 3.4 AR was born. Points of Differentiation - Real-world aerodynamics, optimized around 28mm to 32mm tubeless tires - Wide, Hookless Bead Anti-Pinch Flat Technology - Disc brake-specific materials and construction - Low weight leader in category - Tubeless-only design
ENVE Silca Valve Extenders
$29.99
SILCA valve stem extenders for tubular tires and tubes with removable valve core. ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm. - The 34mm set is optimized for the SES 3.4 and SES 3.4 Disc - The 45mm set is optimized for the SES 4.5 and SES 5.6 Disc - The 75mm set is optimized for the SES 7.8 and SES 7.8 Disc
ENVE Ti Road Skewer
$89.99
The finest wheels deserve the best skewers. These skewers echo ENVE's design ethos of light weight, durability, and aesthetics. This set of high-end quick release skewers for ENVE carbon fiber wheels also work well with any QR hubs and dropouts requiring 100/130mm (Rim Brake) or 100/135mm skewers (Disc Brake). - Weight: 87g (100/130), 88g (100/135)
Delta Axlerodz Bolt-On Skewers
$19.99
- Extra security against theft - 5mm hex CrMo axle
Zipp 30 Course Rim-brake Clincher
$555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Zipp 3ZERO MOTO 29-inch Tubeless Front Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Page 1 of 6 Next page